A Distinct Rose-Hue Finish
The rose-hue finish gives customers an option alongside neutral clear and violet finishes. Show a physical sample on glass so they can judge the appearance in real light.
HD-WPF-ROSE · ROSE-HUE FINISH
HD-WPF-ROSE Windshield Protection Film
HD-WPF-ROSE is HOUDE’s rose-hue exterior windshield protection film, with a 7 mil TPU base film and a 1.2 × 15 m roll size.
HD-WPF-ROSE · PHANTOM ROSE FINISH
A Rose-Hue Finish for Your Windshield Film Range
HD-WPF-ROSE, also presented as the Phantom Rose finish, gives your range a rose-hue option alongside clear and violet windshield films. Review the product data and sample appearance for your market.
Exterior Windshield Application
HD-WPF-ROSE is listed for exterior windshield application, adding a film layer between the glass and everyday road debris.
Specs You Can Compare
The current product table lists VLT, UVR, IRR and TSER alongside thickness, base film and roll size below. Confirm applicable methods and tolerances in current product documents.
Wholesale and Private Label
HOUDE works with distributors, installers and automotive film brands. Talk with us about samples, wholesale orders and private-label packaging for your market.
Overview
HD-WPF-ROSE at a Glance
- Model: HD-WPF-ROSE
- Finish: Rose-hue · Phantom Rose
- Product: Exterior windshield protection film
- Base film: TPU
- Listed performance: 93.5% VLT · 6.5% IRR · 99.5% UVR · 10.5% TSER
- Thickness and roll size: 7 mil · 1.2 × 15 m
- Manufacturer / brand: HOUDE / HDONE
Request current model-specific documents and a physical sample for evaluation.
Film Structure
HD-WPF-ROSE Film Structure
HD-WPF-ROSE uses a TPU base film. Ask HOUDE for the complete layer stack, adhesive and top-coat details if your team needs them before a trial.
Specifications
HD-WPF-ROSE Technical Specifications
The current product table lists the figures below for HD-WPF-ROSE. Confirm test methods, tolerances and roll configuration against the current technical sheet before a bulk order.
| Model | HD-WPF-ROSE · Phantom Rose finish |
|---|---|
| Finish | Rose-Hue |
| Application | Exterior windshield |
| VLT / UVR | 93.5% / 99.5% |
| IRR / TSER | 6.5% / 10.5% |
| Thickness · base film · roll size | 7 mil · TPU · 1.2 × 15 m |
Installation
Install on Exterior Glass
HD-WPF-ROSE is listed for exterior windshield application. Have an experienced installer handle the first trial, check the view from the driver’s seat, and confirm local rules plus vehicle-maker guidance for cameras or sensors.
FAQs
HD-WPF-ROSE FAQs
What is HD-WPF-ROSE?
HD-WPF-ROSE is a rose-hue exterior windshield protection film in HOUDE’s HDONE range. It gives distributors and installers an appearance option alongside neutral clear and violet finishes.
How Should Buyers Evaluate the Rose-hue Finish?
Use a physical HD-WPF-ROSE sample on representative glass and assess it in daylight and shop lighting. Confirm the actual shade with your team and customers before selecting it for a market.
What Specifications Should I Use to Compare HD-WPF-ROSE?
The current product table lists 93.5% VLT, 99.5% UVR, 6.5% IRR and 10.5% TSER. The film is 7 mil TPU and comes in a 1.2 × 15 m roll. Confirm test methods and conditions in current documents.
Will the Film Prevent Every Rock Chip?
No. HD-WPF-ROSE adds a layer over the glass, but no windshield film can promise protection from every impact. Chip risk still depends on the object, speed, impact angle and windshield condition. Set expectations with customers and inspect the film after an impact.
Can the Film Affect Visibility or ADAS?
Visibility and ADAS performance can vary by vehicle, windshield and installation. Check local rules and vehicle-maker guidance, then have an installer assess the view from the driver’s seat and any camera or sensor areas.
Can Windshield Wipers Scratch HD-WPF-ROSE?
Wipers run directly over exterior film, so worn blades, grit or trapped dirt can leave marks and speed up wear. Keep the glass and blades clean, replace damaged wipers and follow the installer’s care advice.
BEFORE YOU ADD IT TO YOUR RANGE
What to Check Before Adding HD-WPF-ROSE
A new windshield film has to make sense for your market and your installers. Use these checks to assess HD-WPF-ROSE before adding it to your range.
Show the Real Finish
Apply the sample to representative glass, then view it from inside and outside in daylight and shop lighting. Customers can judge the actual rose hue instead of relying on a screen image.
Compare It with Clear and Violet
Show Phantom Rose beside the clear and violet films in the HDONE range. Keep lighting and published test values consistent so buyers can compare the finish and figures on the same basis.
Try It with an Installer
Have a professional installer run a trial on a vehicle common in your market. Get feedback on visibility, edge finish, wiper contact and aftercare before adding it to your service menu.
Check Local Fitment Requirements
Check local windshield-film rules and the vehicle maker’s guidance for cameras and sensors. Confirm what applies to the vehicles you plan to serve before selling or installing HD-WPF-ROSE.
Plan Volume and Packaging
Tell HOUDE your market, customer type, expected order quantity and packaging needs. We can discuss sample availability, wholesale supply and private-label options.
BUYING & INSTALLATION GUIDES
More on Windshield Protection Film
Need installation steps or help choosing a windshield film for your market? Start with these practical guides.
Windshield Protection Film
How to Choose Windshield Protection Film for Your Business
Windshield Protection Film
How Long Does Windshield Protection Film Last?
Windshield Protection Film
How to Install Windshield Protection Film: A Professional Guide
See HD-WPF-ROSE on Glass
Tell us where you plan to sell HD-WPF-ROSE, the vehicles you serve and your expected order volume. We’ll help you check sample availability, current specifications, wholesale supply and private-label options.